All New D3A Titanium Limited Edition. AA/14500 flashlight. Must have for titanium collectors.

Finest master craftsmanship and exotic titanium collection.

Features Dimmable output when using Li-ion

The unique beauty of Titanium

Titanium has the highest strength-to-weight ratio of any metal and superb corrosion resistance, making it ideal for the material choice for our limited edition pocket flashlights.

The D3 clicky Ti is machined from titanium rod and brass cube with CNC and hand polished to mirror-like finish. 

Upgraded LED driver

D3A clicky Ti uses all-new high output A750 RC LED driver. It feature high efficiency, clicky and twist head operation, programmable lower-low output mode, optional mode memory, hidden auxiliary modes, and most importantly fully supports single li-ion 14500.

What's new?

• New D3 body style
• LED Copper MCPCB star board with DTP technology and direct heat path
• Solid brass heatsink
• Titanium built and glossy polished finish
• Features very smooth thread
• A750 circuit w/ li-ion support
• Programmable last mode memory and lower-low settings
• Pre-select output before turning on
• White switch boot mixed with glow-in-the-dark powder
• Harden surface treatment
• 275/199/15/2 LED lumen (SST20 4000K CRI)
• Runtime: 1/2.2/35/150+ hours
• 2,050 lux @ 1 meter HI LED | Beam distance: 99 yards (91 meters)
• Twist head for group output, clicky switch for on/off and modes
• Compatible with 14500 li-ion Battery fitment

Operations:

(Basic) Press on the switch button until it clicks to switch on. Press the switch again for off. Access output groups 1 & 2 by tighten or loosen the head. Slightly press the switch to switch between different outputs.

(Advance) 1) Lower low output -With "Lower low" function disabled, lowest (second lowest) output will increase by about three (two) times. Toggle this setting starting with head loosens, turn on the light, and then repeat tight and loose for three times. 2) Mode memory - remebers the last output in group 1. To toggle this setting, with head tighten, turn on the light, and repeat loose and tight for three times.

* Using 3.7V li-ion significantly increase the LED output and heat. Limit each usage to five minutes or less at high and turbo output. Hold the light in your plam to help removing heat from the LED. If you find the flashlight too warm to hold, turn off the light, or lower the output to allow it to cool down. Do not leave the light running unattended.

* D3A Ti head is made in one piece, and therefore its glass lens is not user replaceable.